Reminiscent of John Reihart’s break though
Reminiscent of John Reihart’s break though in 1922/3
First USA – EU amateur QSO on 2200m, used QRP Labs Ultimate3S transmitter at both stations
It’s always nice to be able to report unusual uses of the well established Ultimate3S QRSS/WSPR/etc transmitter kit. The majority of constructors use the kit for WSPR. But it can transmit lots of other modes too! CW, FSKCW, DFCW, QRSS, Hell, Slow-Hell, JT9, JT65, ISCAT, Opera, and PI4. In all their various flavours. DFCW is very slow CW, sending Morse characters but with both “dit” and “dah” having the same duration; to differentiate between them there is a frequency shift so that the “dah” is typically 5Hz higher than the “dit”. It has a very high signal to noise ratio when long symbol durations are used.
Chris 2E0ILY and Paul N1BUG report the first ever USA – EU amateur radio QSO on 2200m band (136kHz band), on 26-Mar-2018. They used DFCW mode with 60 second dits and a frequency shift of 0.25Hz permitting a very high signal to noise ratio. 60 second dits in normal CW would mean about 1 word per HOUR!
Chris and Paul both used their Ultimate3S kits to transmit the DFCW messages. Antennas are necessarily electrically short on 2200m, and so typically high powers are used. Paul N1BUG says he uses a home-made single FET Class E power amplifier, with 175-200W output; the EIRP is estimated at no more than 0.5W. His antenna is a 27m tall vertical with 3x 33m parallel top hat wires spaced 1.5. The receiver is a 9m tall low noise vertical feeding home made band pass filter, pre-amp and Software Defined Radio. Paul says:
“We used an old technique of night by night transmission sequencing and completed the QSO in four nights which is the minimum possible with this method. This QSO would not have been possible without Chris’s kindness and dedication nor without my trust U3S!”
“The receiver is a modified Softrock Lite II. The oscillator has been reworked to provide a suitable LO for 2200m reception, the front end filter reworked and significantly augmented. It is preceded by a 2N5109 preamp and BPF.”
More details are on Paul’s website http://www.n1bug.com/lfmf/
The pictures below show Paul’s Ultimate3S, and Chris 2E0ILY’s transmission mberswith the “O” signal report as received by Paul N1BUG.
Congratulations to Paul N1BUG and Chris 2E0ILY on this achievement!